Solution for the white discoloration fault on the inner side of the chrome plating layer weld of the roller
Release Time:
Aug 07,2015
The chrome layer on the printing roller is close to the printing head.10mmWhitening occurs at the position
The chrome layer on the printing roller shows whitening on the inside of the weld.Fault phenomenon:
The chrome layer on the printing roller is close to the printing head.10mmWhitening occurs at the position, and in severe cases, the chrome layer even peels off. Under a microscope, the faulty coating appears with an orange peel texture. Polishing does not improve the fault, which often occurs in printing rollers with thin walls, thin blockages, and diameters in.120-180mmtypes of printing rollers.
Many manufacturers report that the cause of the above faults ischromeplatingprocesscausingtheproblem.chromeAs the usage ofchrome additiveschromeAs the usage ofincreases, the fault phenomenon will become more severe. StoppingchromeAs the usage ofor reducing
the usage will alleviate or eliminate the fault. This analysis seems reasonable, but in fact, everyone is blinded by the truth.
There is good news to share: to solve this electroplating fault, Changjin has identified the root cause through research. Colleagues encountering this issue can contact us, and Changjin is willing to provide this technical service to help you solve your problems!You can alsoadd ourpublic account(cjzbhc)and send your problem, company name, and contact information, and a professional technician will get in touch with you to resolve the issue.
Leave Messags.
Any inquiries? questions? We’re here to help. Send us a message and we’ll be in touch.
