Sulfuric acid stripping process
Release Time:
Oct 29,2013
Sulfuric acid chromium removal process
The sulfuric acid chromium removal process is a fast and mild chromium removal process.
It is particularly suitable for the removal of chromium layers from gravure printing. Its advantages are:
势在于:
- It is a sulfuric acid-based catalyst and does not contain chlorides.
- It causes minimal damage to the substrate.
- The removal catalyst can create a passivation layer on the copper surface,
- therefore, it protects the copper surface during the removal process. This protection makes it easier to achieve good electroplating results when re-chroming the roller.
- Compared to hydrochloric acid removal processes, the emission of toxic gases is significantly reduced.
Sulfuric acid chromium removal process

1. Fast removal speed; under normal temperature conditions, a 10um chromium layer can be completely removed in 3.5-4 minutes.
2. No heating required, saving energy consumption.
3. No power supply needed, and the associated anode and copper bus are also unnecessary, saving equipment investment.
4. Contributes to wastewater treatment.
5. Provides protection for the copper layer, making subsequent chromium plating easier.
6. No toxic gas emissions, resulting in less environmental pollution.
| Removal area | 1 | M2 | Coating thickness | 10 | um | ||||||||
| Process name | Consumption | Unit price | Amount (Yuan) | Electricity cost (calculated at 8V) | Total (Yuan) | Usage cycle: | |||||||
| Sodium hydroxide process | Sodium hydroxide | 184.62 | g | 4 | Yuan | 0.74 | 4 | KWH | 4.7 | 1-2 months | |||
| Hydrochloric acid process | Industrial hydrochloric acid | 1010.4 | g | 1.4 | Yuan | 1.4 | 0 | KWH | 1.4 | 2-4 months | |||
| Sulfuric acid process | Industrial sulfuric acid | 214.25 | g | 1.4 | Yuan | 0.2 | 0 | KWH | 4.2 | 8-12 months | |||
| Additives | 20 | g | 200 | Yuan | 4 | ||||||||
Cost comparison
1. The chromium layer dissolves in the form of trivalent chromium, and wastewater treatment does not require reduction.
2. Waste liquid can be used as a pH adjustment material, saving wastewater treatment costs.
3. Unlike the sodium hydroxide process, wastewater treatment does not require a large amount of sulfuric acid for neutralization, saving process and time.
Leave Messags.
Any inquiries? questions? We’re here to help. Send us a message and we’ll be in touch.