The ideal solution to the increase of copper sulfate
Release Time:
Oct 26,2013
Introduction --- Current Situation
- High consumption of sulfuric acid ---- Based on actual production analysis, the amount of copper sulfate solution carried out by the plate roller or lost through ventilation is relatively small, even negligible in calculations. However, each factory consumes 200-400 kg of sulfuric acid for copper tank replenishment every month.
- Low utilization rate of copper balls ---- Currently, all plate-making factories face a common problem of increased copper sulfate content in the acid copper plating solution. Generally, the solution needs to be drained and diluted every 3-4 months, resulting in most manufacturers having a copper ball utilization rate of less than 85%.
- Electricity consumption for electroplating cannot be effectively controlled ---- In order to limit the increase of copper sulfate, most manufacturers control the sulfuric acid content within the range of 50-65 g/L, while also keeping the replenishment of copper balls at the lower limit. This leads to higher bath voltage during production, with most manufacturers operating at a production voltage of 7-8V.
The above phenomena can lead to low utilization rates of copper balls, excessive consumption of sulfuric acid, and waste of energy.





Leave Messags.
Any inquiries? questions? We’re here to help. Send us a message and we’ll be in touch.