Chrome mist inhibitor
Chrome mist inhibitorCr-surfactantIt is a stable, high-efficiency, non-perfluorinated anionic surfactant.
- Commodity name： Chrome mist inhibitor
- Product description
-
Chrome mist inhibitorCr-surfactantIt is a stable, high-efficiency, non-perfluorinated anionic surfactant. It provides a good foam layer on the surface of the plating solution, and can also reduce the surface tension of the plating solution to remove chromium mist and reduce the loss of chromium solution. Chrome mist inhibitorCr-surfactantMainly used in protective decorative chrome plating and hard chrome plating process to suppress the generation of chrome fog.
一、 Features：
1.Reduce the surface tension of the plating solution, and form a continuous and dense fine foam layer on the liquid surface during electrolysis, which can effectively prevent the overflow of chromium mist.
2.Reduce the cost of electroplating, even in the case of no ventilation, the chromium content per cubic meter of air at the side of the tank can be reduced to0.002-0.004mg/M3Reduce the cost of electroplating, even in the case of no ventilation, the chromium content per cubic meter of air at the side of the tank can be reduced to0.05mg/M3，Can also save the amount of chromic anhydride used30%。
3.Eliminates environmental pollution caused by chromium fog, protects the health of workers, and significantly improves social and economic benefits.
4.Strengthen the bonding force of the chrome plating layer and improve the hardness of the plating layer.
5.High stability, low consumption, low price and easy to use.
6.Can extend the service life of ventilation and other electroplating equipment.
二、Product traits
Chrome mist inhibitorCr-surfactantThe appearance is a colorless transparent liquid, viscous, non-corrosive, non-flammable, and non-explosive.
三、Usage and dosage
1.It is recommended to open the cylinder every1000Liter of plating solution added4-6Liter of chromium mist inhibitor can effectively remove chromium mist and reduce surface tension;1000Liter of plating solution can be added8Liter of chromium mist inhibitor reduces the surface tension of the plating solution to a lower level; excessive addition of chromium mist inhibitor will cause excessive foaming.
2. During the electrolysis process, the chromium mist inhibitorCr-surfactantThe addition of chromium mist inhibitor can be quantitatively supplemented by the ampere hour value;0.04-0.08升/10000Ampere hour.
Key words:
Related Products
Get A Quote
Any inquiries? questions? We’re here to help. Send us a message and we’ll be in touch.
